P/N: 108116
The Cortex H1P Portable Handset offers wireless control of Cortex V1 VHF and Cortex M1 smartAIS.

P/N: 100081
The Cortex H1 Tethered Handset offers control of Cortex V1 VHF and Cortex M1 smartAIS.

P/N: 010-009010-01
The WatchMate Vision Is Our Most Advanced Class B AIS Transponder, Including Built-in WiFi, NMEA 2000 & 0183, Color Touchscreen, GPS Receiver & Built-in GPS Antenna

P/N: 100131
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.

P/N: 010-009010-01
The WatchMate Vision Is Our Most Advanced Class B AIS Transponder, Including Built-in WiFi, NMEA 2000 & 0183, Color Touchscreen, GPS Receiver & Built-in GPS Antenna

P/N: 100131
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.

P/N: 010-008000-01
The XB-8000 AIS Transponder has Built-in WiFi, NMEA 2000 Gateway & High Speed 5Hz GPS Receiver. The Best Black Box AIS Transponder You Can Buy!

Everything You Need to Install the WatchMate Vision in Your Nav Station or Wheelhouse! Experience The Best AIS Transponder With A Complete Package.

The Complete Package Including Everything You Need to Install the XB-8000 AIS Transponder in Your Nav Station or Wheelhouse! Experience The Best Black Box AIS Transponder A Boater Can Buy!

P/N: GPA762
Multi-constellation external GNSS Antenna for the Cortex Hub (V1 & M1). IP67 and UV stable for use in harsh marine environments. Supplied with 10m (33ft) patch cable.

P/N: GPA680
External Cellular Antenna connects using the Cellular Antenna Patch Cable (included) to the Cortex Hub (V1 & M1), offering enhanced range over the internal cellular antenna.

P/N: 010-000160-02
Simplify installation of AIS transponders by sharing an existing VHF antenna using this splitter. AIS amplifier greatly improves AIS reception and increases receive range.

This antenna system combines a high performance GPS patch antenna and a low noise amplifier into state-of-the-art low profile, extremely compact and fully waterproof enclosure.

This antenna system combines a high performance GPS patch antenna and a low noise amplifier into state-of-the-art low profile, extremely compact and fully waterproof enclosure.

Extension cable kit for external GPS antenna used with WatchMate Vision and XB-8000 AIS transponders

Rail mount for installing GPS antennas on 1-inch (25mm) rails

Loud remote alarm for WatchMate AIS transponders, receivers, and displays. Adjustable volume and choose steady or pulsing sound.

P/N: 311011
H1 Handset Bulkhead Connector includes a mounting base, cover, waterproof cap and power cable. Connect the bulkhead connector to 12V or 24V DC.

P/N: 505005
2.4GHz Wifi Antenna connects externally by SMA connector to the Cortex Hub. The External Wifi Antenna offers increased range over the internal antenna.

P/N: 505050
NMEA 2000 T-Connector connects along the NMEA 2000 network backbone to provide a drop point for the Cortex Hub (V1 & M1).

P/N: 505042
The 2m (6ft) NMEA 2000 Drop Cable connects an NMEA 2000 device to an NMEA 2000 network.

P/N: 505010
Cortex Hub Power Cable is 2m (6ft) corrosion resistant marine tinned cable. The locking connector provides a secure connection to the Cortex Hub.

P/N: 211002
This VHF Patch Cable is 2m (6ft) and connects the Cortex Hub Auxiliary VHF port (BNC) (labelled Splitter) to an external VHF Radio antenna port (PL259).

P/N: 505005
The 5m (16ft) Cellular Patch Cable is a high performance low loss cable to connect the External Cellular Antenna (GPA680) to the Cortex Hub.

P/N: 211010
The GPS Antenna Patch Cable is a 5m (16ft) long, high performance low loss cable with Male SMA to both the External GPS Antenna and the Cortex Hub (V1 & M1).

P/N: GPA680
External Cellular Antenna connects using the Cellular Antenna Patch Cable (included) to the Cortex Hub (V1 & M1), offering enhanced range over the internal cellular antenna.

P/N: GPA762
Multi-constellation external GNSS Antenna for the Cortex Hub (V1 & M1). IP67 and UV stable for use in harsh marine environments. Supplied with 10m (33ft) patch cable.

P/N: 15100
Railblaza Cradle Adapter fits to the rear of either the H1 Cradle or the H1P Charging Cradle allowing a Railblaza StarPort attachment to be connected.

P/N: 233050
H1P Handset Charging Cradle securely holds a Cortex H1P Portable Handset. The cradle is pre-wired for connection to 12V or 24V DC.

P/N: 233050
The H1 Handset Cradle is non-powered and securely holds the Cortex H1 Tethered Handset. The H1 Handset Cradle can also be used as an additional securing position for the H1P Portable Handset.

P/N: 111210
The External Weatherproof Speaker is compact in size and designed for the marine environment with an IP66 ingress protection and is suitable for mounting almost anywhere on board.

P/N: 141025
Loud remote alarm for WatchMate AIS transponders, receivers, and displays. Adjustable volume and choose steady or pulsing sound.

Loud remote alarm for WatchMate AIS transponders, receivers, and displays. Adjustable volume and choose steady or pulsing sound.

Extension cable kit for external GPS antenna used with WatchMate Vision and XB-8000 AIS transponders

2m (6.5ft) long cable for the Vesper Marine AIS / VHF Antenna Splitter connects VHF radio or AIS transponder to the splitter

2m (6.5ft) long cable for the Vesper Marine AIS / VHF Antenna Splitter connects AM/FM radio to the splitter

Waterproof and locking 5m (6ft) USB cable for the WatchMate 850, WatchMate VIsion and XB-8000 AIS transponders

WatchMate display protective cover designed to fit firmly over WatchMate 670 Display, WatchMate 670 Receiver or the WatchMate 850 Transponder

WatchMate display protective cover designed to fit firmly over WatchMate 670 Display, WatchMate 670 Receiver or the WatchMate 850 Transponder

2m (6.5ft) replacement power cable for all Vesper Marine AIS transponders, receivers or displays

Replacement mounting bracket for the Vesper Marine AIS WatchMate 650/670/750/850

Replacement thumbscrews & washers for the Vesper Marine AIS WatchMate 650/670/750/850 and WatchMate Vision